Chrysler / Tesla Door Clip
Top Head Diameter: 15mm (19/32")
Middle Head Diameter: 18mm (45/64'')
Bottom Head Diameter: 18mm (45/64'')
Stem Diameter: 10mm (25/64")
Stem Length: 15mm (19/32")
Overall Length: 23mm (29/32'')
Fits Hole: 10mm (25/64'')

Toyota / Tesla / Nissan Push-Type Clip
Head Diameter: 18mm (23/32")
Stem Length: 12mm (15/32")
Fits In Hole: 8mm (5/16")

Honda / Tesla Push-Type Retainer
Head Diameter: 18mm (45/64'')
Stem Length: 15mm (19/32'')
Panel Range: 9mm - 11mm (23/64'' - 7/16'')
Fits Hole: 8mm (5/16'')

Toyota / Tesla Trim Panel Retainer
Top Head Diameter: 13mm (33/64'')
Middle Head Diameter: 16mm (5/8'')
Bottom Head Diameter: 18mm (45/64'')
Stem Diameter: 8.5mm x 9mm (21/64'' x 23/64'')
Stem Length: 14mm (35/64'')
Overall Length: 20mm (25/32'')
Type: Triple Head

GM / Chrysler / Tesla Metric Push-On Speed Nut
Stud Size: 4mm (5/32'')
Outer Diameter: 11mm (7/16'')
Type: Push On
Used For: Non-Threaded Fasteners

GM / Chrysler / Tesla Speed Nut
Width: 12.7mm (1/2")
Height: 14mm (9/16")

GM / Tesla Garnish, Interior Trim, Bezel Scuff Plate Clip
Height: 17mm (11/16'')
Width: 12mm (15/32'')

Ford / Tesla Door Trim Panel Clip w/Sealer
Top Head Diameter: 16mm (5/8'')
Middle Head Diameter: 16mm (5/8'')
Bottom Head Diameter: 22mm (55/64'')
Stem Diameter: 11mm (7/16'')
Stem Length: 17mm (43/64'')
Overall Length: 28mm (1 7/64'')

GM / Nissan / Tesla Door Trim & Rear Bumper Fascia Retainer
Head Diameter: 11mm (7/16")
Stem Diameter: 5.6mm (7/32")
Stem Length: 17.5mm (11/16")
Overall Length: 19mm (3/4")
Fits Hole: 5.6mm (7/32")

Toyota / Tesla Door Trim Retainer
Top Head Diameter: 13mm (33/64'')
Middle Head Diameter: 15mm (19/32'')
Bottom Head Diameter: 17.5mm (11/16'')
Stem Diameter: 9.5mm (3/8'')
Stem Length: 13mm (33/64'')
Head Type: Triple

Nissan / Tesla Door Trim Panel Clip
Top Head Diameter: 13mm (33/64'')
Bottom Head Diameter: 19mm (3/4'')
Stem Diameter: 8.8mm (11/32'')
Stem Length: 17mm (43/64'')
Overall Length: 22mm (55/64'')

Tesla Engine Under Cover Push-Type Retainer
Head Diameter: 18mm (45/64'')
Stem Length: 16mm (5/8'')
Fits Hole: 8mm (5/16'')

Nissan / Tesla Speed Nut
Screw Size: 6.30mm (#14 - 1/4'')
Panel Range: 0.635mm - 3.81mm (.025'' - .150'')
Center of Hole to Edge: 9.5mm (3/8'')

VW / Audi / Tesla Door Trim Clip
Width: 9mm (23/64'')
Height: 22.5mm (7/8'')
Width Across Bottom Legs: 13.5mm (17/32'')

NOTE: ClipLizard Name Change from 301-900 to 309-001.

VW / Tesla / Mercedes Moulding Panel Fastener
Height: 22mm (55/64'')
Width: 9mm (23/64'')

NOTE: ClipLizard Name Change from 301-902 TO 309-002.

Tesla Steel Screw
Screw Size: M4.2x19
Head Diameter: 10.3mm (13/33'')
Overall Height: 21.5mm (27/32'')
Torx Bit Size: T-20 / TX20

NOTE: ClipLizard Name Change from 110-400 to 511-419.

Tesla Body Panel Blind Rivet
Rivet Diameter: 6.5mm (1/4'')
Grip Range: 2mm-4.5mm (5/64'' - 3/16'')
Flange Diameter: 13mm (33/64'')

NOTE: ClipLizard Name Change from 110-600 to 610-000.

Tesla Body Bolt
Screw Size: M6x18
Thread Pitch: M6x1.0
Washer Diameter: 17mm (43/64'')
Wrench Size: 10mm (25/64'')
Strength Class: 9.8

NOTE: ClipLizard Name Change from 110-500 to 1110-301.

Tesla Body Bolt
Bolt Size: M6X18
Diameter: 6mm (15/64'')
Free Spinning Washer O.D: 18mm (45/64'')
Length: 18mm (45/64'')
Wrench size: 10mm (25/64'')
Thread Pitch: 1.0 (Coarse)
Strength Class: 8.8

NOTE: ClipLizard Name Change from 110-501 to 1110-300.